Home Page    Voltage Stabilizer    Non-contact intelligent voltage Stabilizer

Non-contact intelligent voltage Stabilizer

Working Principle Block Diagram:

1,The upper limit of ambient air temperature is +40 ° C, and the average temperature within 24 hours is not more

+35 ° C. The ambient air temperature limit is -5°C

2 The altitude of the installation site shall not exceed 2000m(if the altitude is greater than 2000m, reduce the capacity

to use it)

3 When the highest temperature is +40 ° C, the relative humidity of the air does not exceed +50%. A higher relative

humidity is allowed at a lower temperature. For example, 90% at 20°C. Special measures should be taken for occasional

condensation due to temperature changes.

4 Indoor use, should be well ventilated, no obvious pollution, corrosive gas, dust, combustible and combustible gas.

5 level installation, no significant shake vibration and shock.

6 Output terminals of voltage regulators cannot be used in parallel..

Note: The special conditions of use that do not meet the above provisions should be determined through consultation

between the user unit and our company.